HISTORY OF MOSSBERG MC1SC


Mossberg 590. Produced in September 1994, The barrel is non-chrome-plated cylindrical, 24 inches, it does not have an additional ring for mounting a bayonet. The channel is processed very well. Plastic stock and forend (polyamide). The coating of metal parts is matte anti-reflective dark green. The coating protects well the metal parts of the gun from corrosion. The store holds 8 cartridges 12X70 or 7 cartridges 12X76. However, when the magazine is full, the balance of the weapon changes not for the better. The spring of the magazine feeder is soft, there are no problems with loading, however, the spring itself needs constant monitoring, since it is very susceptible to rusting in the moss berg mc1sc .Get more information about this.

The shutter is "non-separable". You can, of course, disassemble it, but it is all on pins and hairpins, removing them frequently over time will cause them to fall out. The trigger block is platyk. The trigger itself is quite simple and reliable and, unlike the shutter, can be completely disassembled and assembled using a banal drift. The feeder is metal and tightly pressed against the shutter (it is lowered only during reloading).


A total of about 15,000 shots were fired from the gun. Not a single delay was noted through the fault of the gun. When using old Record cartridges, sometimes the ejector tooth slipped off the rim of the case due to the fact that the case glass was swelling. There were never any problems with other cartridges. Breakdowns and failures too. Although this is probably because the gun is regularly and efficiently serviced by me at moss berg mc1sc


The gun shoots bullet cartridges quite cheap. On a scooter with a Polev 1 bullet and an open sight, sometimes I get a bunch of 5 cm at 50 meters.


Naturally, this gun is of little use for hunting, but I am not a hunter, but, so to speak, a militarist. For bullet entertaining shooting and banging - the very thing. The rest of the time, the gun is used to guard the house. Key features include size, weight, caliber, and carry ability. 


The technologically advanced B-725 Sporter MC double-barreled shotgun from the Belgian company Browning is designed with extraordinary durability, high impact force, good accuracy and a simple but very stylish design. The model uses cartridges of 12x76 mm caliber. The principle of shooting action is a firing mechanism located in one block. The peculiarity of the structure of the gun excluded the presence of a store - instead, to reload, it is necessary to break the barrel and load the shells directly into the barrel. The capacity of the model is equal to two charges in moss berg mc1sc. Back-Bored technology improves accuracy, speed and sharpness of the shot. There is an aiming ventilated bar and a brass front sight. The barrel is made of gun steel. The forend and stock are made of walnut material. The trigger is gold in color. The handle is engraved, which allows you to firmly hold the weapon in the palm of your hand. The barrel length is 760 mm. Weight 3.6 kg. The metal surface of the receiver is engraved with decoration. The model will be a good purchase for both fishermen and a wide range of amateurs of sports or recreational shooting.







Powered by